- 1.m Flue pipe
- 2 x Half Stainless Steel grids
- Ember maker
- Bottom door
- Top Door
- Ash drawer
- Cowl base & top
- Heat deflector plate
- Dimensions (W , D , H ) (1000 inner dims) 1070mm x 2200mm x 545mm
Free Standing Explainer Video
Your Freestanding unit can be installed either inside or outside.
If it is been installed outside, please make sure to bolt down the unit to a solid surface. This is to secure the unit and prevent it from been blown over if exposed to wind.
If your unit is been installed under a roof, you have different options, depending on what material your roof is made from- we can guide and assist you in this regard.
If the roof is made from a steel structure, like corrugated iron, you can get away with running the existing the flue through the roof and use our Dektite rubber flashing, which comes with a silicone fixing kit, on the outside to prevent water leaks.
If your roof is made from timber or other combustible material on the inside, you will need to use a insulated flue set which fits inside the actual flue. This set includes a start off adaptor and the insulated flue with an external diameter of 350mm which works perfectly in the Super Deluxe range.
Depending on what the external surface of your roof is will determine what flashing you can use.
If its the corrugated iron roof, you can use the Dektite rubber flashing, which comes with a silicone fixing kit.
If its a tiled roof, you can use our Saldek Alum base flashing .
Please note that these flashings and insulated flues are available in our online store but we do recommend that you speak to us first so we can advise what would work for you.